• The GXP design seals both the chemistry and wash water in one self-contained system. You can avoid costly plumbing installation and forget about chemical replenishment entirely. It is a closed system, which means you never flush environmentally damaging chemicals down the drain.  Also, with the optional daylight loader, you do not need to tie up darkroom space.  No special room is needed, you can place it anywhere.
  

• One switch activates  STANDBY and RUN operations. Depress the RUN position and insert film. That is all there is to it. No temperature or time decisions to ever think about. For endo 2 minute processing speed of intra-oral film, just depress the ENDO switch (which will flash to remind you it’s on). Depress once more to automatically return to normal speed.
• The GXP Film Processor is a consistent, quality film processor that respects the environment. There is no need to have chemical replenishment; chemicals never have to be flushed down the drain. The full recycling of stored chemistry provides automatic replenishment; you only change chemistry every 3 to 4 weeks.
• Features: 
  • Handles all dental size films
  • Available as a stand-alone system; no plumbing required
  • Daylight loader available at additional cost
  • Can be connected to building plumbing or closed chemistry recirculation

This processor has been refurbished by our techs here at Dental Equipment Liquidations.  It will last until you wish to go to digital, so order today because we are always low on inventory for this model.

****  WE DO NOT REQUIRE A TRADE-IN TO RECEIVE THIS SPECIAL LOW PRICE AS MOST OF OUR COMPETITORS DO.  AS A MATTER OF FACT, WE USUALLY PAY CASH FOR YOUR OLD FILM PROCESSOR (DEPENDING ON CONDITION) WHEN WE DELIVER YOUR REFURBISHED UNIT …….

FREE: 2 Year  Parts Warranty

**Contact us for a shipping quote to your location.

These are very clean and excellent running x-ray. Refurbished and tested by our techs for optimal performance. The GX-770 has a proven market reliability and value.

The Gendex GX-770 incorporates unique automatic line voltage compensation circuitry to provide consistent 70 kVp output each time. Under almost any voltage condition you will get consistent radiographic density. The 770 has a small focal spot for the sharpest resolution and radiographic images-only .6mm compared to .7mm, .8mm or higher on other units. This provides a great combination of high contrast and sharp images. Features: 70 kVp for high contrast films, 0.6 mm focal spot for sharp imaging, Recessed tubehead, 65″ or 74″ arm reach, automatic line voltage compensation, Digitally compatible

The Used Midmark Ritter M9 Autoclave is a great choice for a dental practice.  It has been a great sterilizer for us.  Our dentists and doctors have come to appreciate the design aspects put into this machine.  We go through the process of having this M9 autoclave refurbished to help ensure you get a quality sterilizer.  These are great units, and we are able to ship our refurbished units all over the USA.

We specialize in used dental equipment and know the market very well.  This used Midmark Ritter M9 Autoclave Sterilizer is a great option to add to your dentistry practice, physician office, hospital, veterinary practice, as well as tattoo artists / shops.  If you have used one of these units before you know why this is one of our top sellers.  Call one of our techs or sales associates today for help on saving lots of money on used dental equipment.  Then obviously, we carry a wide range of used dental equipment and we only have a small portion of our inventory currently up.  When you call, one of our team can show you to a fuller range of inventory to choose from.

So whether you are a new office or one that has been around for years.  These refurbished units are ready to work for you and we have them for sale at cheap prices.  You can save money buying used.  It can be a waste though if you don’t have the right source.  With our refurbishing techniques and years of experience you have an easy win.  We are here to serve you and help you save lots of money on one of our recently refurbished used Midmark Ritter M9 Autoclave Sterilizers.

Specifications:

• Overall length: 18.81 inches
• Overall width: 15 inches
• Overall height: 16.44 inches
• Countertop area: Minimum depth 18inches
• Chamber: 9 inch diameter 5 inch depth
• 3.5 gal. usable volume

Trays: 3

FREE: 1 Year Parts Warranty

Finding The Right Used Dental Equipment

We have years of experience in the used dental equipment field.  In fact our owner is a second generation dental equipment specialist.  There are many manufactures, equipment, and even process to choose from.  We can help you save money by finding the right equipment at the right price.

Dentsply Promark AEU-27T 2016 model with hand piece TUL-8m 8:1

Serial EMT2282016-00-42 Manufactured by Aseptico Inc

This unit was purchased when the doctor retired and closed his dental office. The unit is in great condition, as well as handpiece reverse function.

Peri-Pro III with daylight loader complete unit…. the solution for developing intraoral film.

• Processing time, chemistry temperature and chemistry replenishment are automatically monitored and adjusted.

• Stand-by mode for energy conservation, which is great, because electricity use, water consumption and system wear are reduced.

• Archival quality films are processed in 5 ½ minutes.

• Plus, there is an Endo Speed for quick-look films in only 2 ½ minutes!

• Automatic chemistry replenishment & temperature maintenance.

• Microcomputer automatically signals the internal replenishment pumps.

• Stand by mode for energy conservation.

2 Year Parts Warranty !!!!!

TECHNICAL SPECIFICATIONS:

• Weight (lb.):  75

• Dimensions (inches):  18 x 15 x 25

• Water flow:  1/2 gallon per minute

• Water connection:  Valved 3/4″ male straight pipe or standard male garden hose fitting at rear of processor

• Drain:  1 1/2″ vertical PVC standpipe, open at top, connected to 1 1/2″ PVC trap

• Power requirements:  115V, 60Hz, 8A

The optional Daylight Loader and a Quick Loader Covered Feed Chute eliminate the need for a dark room.  We also have these in stock if you ever need one for your dental office.

This refurbished Air Techniques Dental Xray Film Processor has been inspected by our techs and would be a great addition to your dental office.

The AT2000XR automatic Dental film processor is an excellent example of the Air Techniques brand high quality craftsmanship.  The AT 2000 XR line of Xray processors has remained the best selling line of automatic dental film processors in the U.S.A. The AT 2000 XR offers dentists a low maintenance, easy to fix, no hassle film processing option. This unit comes with a one year warranty. These type units are delivered all over the USA on our own trucks.

This automatic film processor by Dent-X is known for being extremely reliable and simple to operate as well to maintain.  The Dent-X 810 uses durable construction and produces high quality X-Ray images.  This is one that we recommend pretty consistently as we know this is a unit are clients have been very pleased with.  This X-Ray film processor is easy to use and has developed quite a following.  We work to keep these in stock due to its demand.  We even carry replacement and refurbished parts for this unit so we can cover the 2 year warranty.  We look forward to getting the chance to serve you.  Call with any questions or concerns.

All Dent-X Automatic Film Processors

• Are extremely low maintenance
• Alert the operator when the system is ready to process film
• Have an infrared dryer – to quickly and quietly dry film
• Have a compact form, specifically designed for dental offices
• Can be cleaned and prepped in minutes

FEATURES: 

Leveling feet 4
Temperature gauge
Multi-speed capability
Rugged chain drive
Processor Specifications
Processing Time:
Dry films in 4 1/2 minutes, endo wet readings in 2 minutes, 6 minute mode for special applications during warm-up

Film Sizes: All dental film sizes from size “0” through 8″ X 10″ (20.3 X 25.4 cm) and 6″ x 12″ (15.2 cm x 30.5 cm)

Dimensions:  30 1/2″L X 17 1/2″W X 14 1/2″H (77.5 X 44.5 X 36.8 cm)

Power Requirements:

115 VAC, 60Hz, 6 amps

230 VAC, 50Hz, 3.8 amps

230 VAC, 60 HZ, 3.8 amps

Tank Capacities:

Developer and fixer solution trays hold 3 qt each (2.84 liters)

Plumbing Requirements:  Open, cup-type drain and standard garden hose faucet with external threading. Processor female hose fitting connects easily to permanent plumbing, if permanent plumbing is used

Water Requirements: 1 ½ gal (5.68 liters) /min., only when processing.

Refurbished ~ 2 Year  Warranty !!!!!!

****We deliver on our own trucks all over the USA Install and remove old units If requested with a 1 year warranty, and contact us for a shipping quote to your location.

*** Ask us about paying cash for your old unit when we deliver your refurbished processor on our own trucks to your location.

Call us or email us with any questions 727-267-3177. we also have the AT2000XR and other dental film processors

Fits Philips DentX 810, Basic, XL, 9000 and Plus with Micro Switch Style. The rack is chain driven and will not work in the worm drive of a DENT-X 9000 WD or EXCEL processors.

This reconditioned DENT-X processor transport rack is redesigned to precise specifications. With proper maintenance and care, this rack will outlast any rack on the market.

• When you purchase this replacement rack, it is priced with the assumption that you will return your old rack to us.
• Your shipping charge includes a pre-paid USPS return label for your old part. This makes it very simple for you to take advantage of our great price.
• When you receive your reconditioned, replacement rack, simply place your old rack in the box, use the enclosed pre-paid label and ship it back to us.
• We ask that you send the old rack back to us within 2 weeks time of receiving your new rack.
• By purchasing this rack from us, you agree to pay the additional 0 Non-Core Return Charge if you do not return your old rack.

This reconditioned A/T 2000 processor transport rack is redesigned to precise specifications. With proper maintenance and care, this rack will outlast any rack on the market.

FREE SHIPPING FOR A LIMITED TIME

• When you purchase this replacement rack, it is priced with the assumption that you will return your old rack to us.
• Your shipping charge includes a pre-paid USPS return label for your old part. This makes it very simple for you to take advantage of our great price.
• When you receive your reconditioned, replacement rack, simply place your old rack in the box, use the enclosed pre-paid label and ship it back to us.
• We ask that you send the old rack back to us within 2 weeks time of receiving your new rack.
• By purchasing this rack from us, you agree to pay the additional $200.00 Non-Core Return Charge if you do not return your old rack.

*****DISREGARD BELOW REQUIREMENTS

• This Item is priced with the assumption that you will return your old rack to us.
• Your shipping charge includes a pre-paid Fedex return label for your old part. This makes it very simple for you to take advantage of our great price.
• When you receive your unit, replacement rack, simply place your old rack in the box, Stick the enclosed pre-paid label and ship it back to us.