• GXP design seals both the chemistry and wash water in one self-contained system. You can avoid costly plumbing installation and forget about chemical replenishment entirely. It is a closed system, which means you never flush environmentally damaging chemicals down the drain.  Also, with the optional daylight loader, you do not need to tie up darkroom space.  No special room is needed, you can place it anywhere.
  

• One switch activates  STANDBY and RUN operations. Depress the RUN position and insert film. That is all there is to it. No temperature or time decisions to ever think about. For endo 2 minute processing speed of intra-oral film, just depress the ENDO switch (which will flash to remind you it’s on). Depress once more to automatically return to normal speed.
• The GXP Film Processor is a consistent, quality film processor that respects the environment. There is no need to have chemical replenishment; chemicals never have to be flushed down the drain. The full recycling of stored chemistry provides automatic replenishment; you only change chemistry every 3 to 4 weeks.
• Features: 
  • Handles all dental size films
  • Available as a stand-alone system; no plumbing required
  • Daylight loader available at additional cost
  • Can be connected to building plumbing or closed chemistry recirculation

This processor has been refurbished by our techs here at Dental Equipment Liquidations.  It will last until you wish to go to digital, so order today because we are always low on inventory for this model.

****  WE DO NOT REQUIRE A TRADE-IN TO RECEIVE THIS SPECIAL LOW PRICE AS MOST OF OUR COMPETITORS DO.  AS A MATTER OF FACT, WE USUALLY PAY CASH FOR YOUR OLD FILM PROCESSOR (DEPENDING ON CONDITION) WHEN WE DELIVER YOUR REFURBISHED UNIT …….

FREE: 2 Year  Parts Warranty

**Contact us for a shipping quote to your location.

Peri-Pro III with daylight loader complete unit…. the solution for developing intraoral film.

• Processing time, chemistry temperature and chemistry replenishment are automatically monitored and adjusted.

• Stand-by mode for energy conservation, which is great, because electricity use, water consumption and system wear are reduced.

• Archival quality films are processed in 5 ½ minutes.

• Plus, there is an Endo Speed for quick-look films in only 2 ½ minutes!

• Automatic chemistry replenishment & temperature maintenance.

• Microcomputer automatically signals the internal replenishment pumps.

• Stand by mode for energy conservation.

2 Year Parts Warranty !!!!!

TECHNICAL SPECIFICATIONS:

• Weight (lb.):  75

• Dimensions (inches):  18 x 15 x 25

• Water flow:  1/2 gallon per minute

• Water connection:  Valved 3/4″ male straight pipe or standard male garden hose fitting at rear of processor

• Drain:  1 1/2″ vertical PVC standpipe, open at top, connected to 1 1/2″ PVC trap

• Power requirements:  115V, 60Hz, 8A

The optional Daylight Loader and a Quick Loader Covered Feed Chute eliminate the need for a dark room.  We also have these in stock if you ever need one for your dental office.

This refurbished Air Techniques Dental Xray Film Processor has been inspected by our techs and would be a great addition to your dental office.

The AT2000XR automatic Dental film processor is an excellent example of the Air Techniques brand high quality craftsmanship.  The AT 2000 XR line of Xray processors has remained the best selling line of automatic dental film processors in the U.S.A. The AT 2000 XR offers dentists a low maintenance, easy to fix, no hassle film processing option. This unit comes with a one year warranty. These type units are delivered all over the USA on our own trucks.

Adec 511

Adec 511 chair

Double Articulating Head rest

Multi position armrest

Chair Swivels 60 degrees

Base down Plate

300 watt power

upgrade floor box included

Adec 532 unit touch pad, tray holder, water system, handpiece position control block, four handpiece tubing with mount.

B and D Dental

This is the last one, the actual unit is in photo graph B & D Dental Offering a Planmeca ProMax 2D offers a variety of imaging modalities in one intelligent X-ray unit.

• Panoramic radiography for general diagnostics of the tooth arch and the jaw.
• Advanced panoramic radiography for specific diagnostics of the tooth arch, jaw maxillary sinuses and TMJ.
• Optional dental tomographic slices for detailed morphologic diagnostics of facial bones.
• Rotational freedom – the SCARA arm can produce any rotation pattern. Network Connectivity.
• Graphical user interface.
• Advanced collimation.
• Upgradable software.
• Dimax 3 Sensor

Upgradeable to 3D Imaging ONLY ONE AVAILABLE AT B&D Dental this price

Includes Acquisition Computer.

This unit MUST be plugged into a its own electrical circuit with breaker to insure consistent current.

Regarding performance this unit has a very large capacity for a tabletop sterilizer.  You are able to get more done and operate at peak performance.  Use the M11 to help keep operations in your office running smoothly.  We find that dentist have been extremely pleased with this units performance.  Midmark makes great units and have developed quite a following when it comes to sterilizers.  We find the M11 to be a great unit and this is one that we get to refurbish unit after unit for our customers.  Buying new can be very expensive and buying used dental equipment can be quite risky.  However, we provide refurbished M11’s so you are able to get a strong unit for a much cheaper price.

This unit has easy front access for filling and draining and has controls that are easy to understand and is the best in the industry. Our techs have set this Midmark M11 Autoclave back to factory settings, replaced door gasket and filler parts (which is the main problems with these type of sterilizers). Programmable controls allow for creation of different cycle parameters for special sterilization needs. Programmable buttons allow you to change the following: Time (3 to 90 minutes), Temperature (230 to 275º F), Dry Time (0 to 60 minutes), Vent (slow or fast) and two program buttons. The #1 and #2 buttons allow you to store the change if desired.

Pre-Programmed Controls:
There Are Four pre-programmed sterilization cycle controls: Unwrapped (132º C or 270º F for 3 minutes), Pouched (132º C or 270º F for 5 minutes), Packs (121º C or 250º F for 30 minutes), Handpiece (Dental Handpiece use only)

LCD clear Display:

Indicates cycle selected, temperature and exposure time for selected cycle. During the cycle, the display shows messages describing status of cycle. When the cycle enters sterilization mode, remaining time is displayed as well as temperature and pressure.

Cycle Start (Initiates selected cycle)

Manual Stop (Terminates selected cycle or function)

Overall dimensions: 22.38 D x 17.62W x 17.56H
Countertop area: Minimum depth 21 inches
Chamber size: 11inches
Dia – 18 inches
6.5 gal. usable volume
Trays: 3
Water reservoir capacity: 1.25 gallon

1 year parts warranty

We have sold many of these units to Dentist veterinary practices and hospitals, medical / doctor offices, as well as tattoo artists ……. all across the United States.

MidMark M11 Complete