• The GXP design seals both the chemistry and wash water in one self-contained system. You can avoid costly plumbing installation and forget about chemical replenishment entirely. It is a closed system, which means you never flush environmentally damaging chemicals down the drain.  Also, with the optional daylight loader, you do not need to tie up darkroom space.  No special room is needed, you can place it anywhere.
  

• One switch activates  STANDBY and RUN operations. Depress the RUN position and insert film. That is all there is to it. No temperature or time decisions to ever think about. For endo 2 minute processing speed of intra-oral film, just depress the ENDO switch (which will flash to remind you it’s on). Depress once more to automatically return to normal speed.
• The GXP Film Processor is a consistent, quality film processor that respects the environment. There is no need to have chemical replenishment; chemicals never have to be flushed down the drain. The full recycling of stored chemistry provides automatic replenishment; you only change chemistry every 3 to 4 weeks.
• Features: 
  • Handles all dental size films
  • Available as a stand-alone system; no plumbing required
  • Daylight loader available at additional cost
  • Can be connected to building plumbing or closed chemistry recirculation

This processor has been refurbished by our techs here at Dental Equipment Liquidations.  It will last until you wish to go to digital, so order today because we are always low on inventory for this model.

****  WE DO NOT REQUIRE A TRADE-IN TO RECEIVE THIS SPECIAL LOW PRICE AS MOST OF OUR COMPETITORS DO.  AS A MATTER OF FACT, WE USUALLY PAY CASH FOR YOUR OLD FILM PROCESSOR (DEPENDING ON CONDITION) WHEN WE DELIVER YOUR REFURBISHED UNIT …….

FREE: 2 Year  Parts Warranty

**Contact us for a shipping quote to your location.

Peri-Pro III with daylight loader complete unit…. the solution for developing intraoral film.

• Processing time, chemistry temperature and chemistry replenishment are automatically monitored and adjusted.

• Stand-by mode for energy conservation, which is great, because electricity use, water consumption and system wear are reduced.

• Archival quality films are processed in 5 ½ minutes.

• Plus, there is an Endo Speed for quick-look films in only 2 ½ minutes!

• Automatic chemistry replenishment & temperature maintenance.

• Microcomputer automatically signals the internal replenishment pumps.

• Stand by mode for energy conservation.

2 Year Parts Warranty !!!!!

TECHNICAL SPECIFICATIONS:

• Weight (lb.):  75

• Dimensions (inches):  18 x 15 x 25

• Water flow:  1/2 gallon per minute

• Water connection:  Valved 3/4″ male straight pipe or standard male garden hose fitting at rear of processor

• Drain:  1 1/2″ vertical PVC standpipe, open at top, connected to 1 1/2″ PVC trap

• Power requirements:  115V, 60Hz, 8A

The optional Daylight Loader and a Quick Loader Covered Feed Chute eliminate the need for a dark room.  We also have these in stock if you ever need one for your dental office.

This refurbished Air Techniques Dental Xray Film Processor has been inspected by our techs and would be a great addition to your dental office.

The AT2000XR automatic Dental film processor is an excellent example of the Air Techniques brand high quality craftsmanship.  The AT 2000 XR line of Xray processors has remained the best selling line of automatic dental film processors in the U.S.A. The AT 2000 XR offers dentists a low maintenance, easy to fix, no hassle film processing option. This unit comes with a one year warranty. These type units are delivered all over the USA on our own trucks.

This automatic film processor by Dent-X is known for being extremely reliable and simple to operate as well to maintain.  The Dent-X 810 uses durable construction and produces high quality X-Ray images.  This is one that we recommend pretty consistently as we know this is a unit are clients have been very pleased with.  This X-Ray film processor is easy to use and has developed quite a following.  We work to keep these in stock due to its demand.  We even carry replacement and refurbished parts for this unit so we can cover the 2 year warranty.  We look forward to getting the chance to serve you.  Call with any questions or concerns.

All Dent-X Automatic Film Processors

• Are extremely low maintenance
• Alert the operator when the system is ready to process film
• Have an infrared dryer – to quickly and quietly dry film
• Have a compact form, specifically designed for dental offices
• Can be cleaned and prepped in minutes

FEATURES: 

Leveling feet 4
Temperature gauge
Multi-speed capability
Rugged chain drive
Processor Specifications
Processing Time:
Dry films in 4 1/2 minutes, endo wet readings in 2 minutes, 6 minute mode for special applications during warm-up

Film Sizes: All dental film sizes from size “0” through 8″ X 10″ (20.3 X 25.4 cm) and 6″ x 12″ (15.2 cm x 30.5 cm)

Dimensions:  30 1/2″L X 17 1/2″W X 14 1/2″H (77.5 X 44.5 X 36.8 cm)

Power Requirements:

115 VAC, 60Hz, 6 amps

230 VAC, 50Hz, 3.8 amps

230 VAC, 60 HZ, 3.8 amps

Tank Capacities:

Developer and fixer solution trays hold 3 qt each (2.84 liters)

Plumbing Requirements:  Open, cup-type drain and standard garden hose faucet with external threading. Processor female hose fitting connects easily to permanent plumbing, if permanent plumbing is used

Water Requirements: 1 ½ gal (5.68 liters) /min., only when processing.

Refurbished ~ 2 Year  Warranty !!!!!!

****We deliver on our own trucks all over the USA Install and remove old units If requested with a 1 year warranty, and contact us for a shipping quote to your location.

*** Ask us about paying cash for your old unit when we deliver your refurbished processor on our own trucks to your location.

Call us or email us with any questions 727-267-3177. we also have the AT2000XR and other dental film processors

Fits Philips DentX 810, Basic, XL, 9000 and Plus with Micro Switch Style. The rack is chain driven and will not work in the worm drive of a DENT-X 9000 WD or EXCEL processors.

This reconditioned DENT-X processor transport rack is redesigned to precise specifications. With proper maintenance and care, this rack will outlast any rack on the market.

• When you purchase this replacement rack, it is priced with the assumption that you will return your old rack to us.
• Your shipping charge includes a pre-paid USPS return label for your old part. This makes it very simple for you to take advantage of our great price.
• When you receive your reconditioned, replacement rack, simply place your old rack in the box, use the enclosed pre-paid label and ship it back to us.
• We ask that you send the old rack back to us within 2 weeks time of receiving your new rack.
• By purchasing this rack from us, you agree to pay the additional 0 Non-Core Return Charge if you do not return your old rack.

*****DISREGARD BELOW REQUIREMENTS

• This Item is priced with the assumption that you will return your old rack to us.
• Your shipping charge includes a pre-paid Fedex return label for your old part. This makes it very simple for you to take advantage of our great price.
• When you receive your unit, replacement rack, simply place your old rack in the box, Stick the enclosed pre-paid label and ship it back to us.

This reconditioned A/T 2000 processor transport rack is redesigned to precise specifications. With proper maintenance and care, this rack will outlast any rack on the market.

• When you purchase this replacement rack, it is priced with the assumption that you will return your old rack to us.
• Your shipping charge includes a pre-paid USPS return label for your old part. This makes it very simple for you to take advantage of our great price.
• When you receive your reconditioned, replacement rack, simply place your old rack in the box, use the enclosed pre-paid label and ship it back to us.
• We ask that you send the old rack back to us within 2 weeks time of receiving your new rack.
• By purchasing this rack from us, you agree to pay the additional $0 Non-Core Return Charge if you do not return your old rack.

• Plugs into 115V outlet
• Light filtering view glass
• Duplicates up to eight #0, #1, or #2 periapical films onto #2 duplicating films at one time
• Automatically timed exposure
• Light-tight elastic fabric cuffs
• Attaches easily to Peri-Pro to eliminate the need for a darkroom.

MODEL GXP –  Rack * Refurbished * for Gendex GXP Processor, This part may be out of stock?

……..We also sell this whole unit complete if you are having other issues with you GXP dental film processor, so please contact us for further information.

• We no Longer need core returns on this product please disregard the following. When you purchase this replacement rack, it is priced with the assumption that you will return your old rack to us.
• Your shipping charge includes a pre-paid USPS return label for your old part. This makes it very simple for you to take advantage of our great price.
• When you receive your reconditioned, replacement rack, simply place your old rack in the box, use the enclosed pre-paid label and ship it back to us.

MODEL GDR – Dry Rack for Gendex Dental Film Processor Refurbished 

• When you purchase this replacement rack, it is priced with the assumption that you will return your old rack to us.
• Your shipping charge includes a pre-paid USPS return label for your old part. This makes it very simple for you to take advantage of our great price.
• When you receive your reconditioned, replacement rack, simply place your old rack in the box, use the enclosed pre-paid label and ship it back to us.
• We ask that you send the old rack back to us within 2 weeks time of receiving your new rack.
• By purchasing this rack from us, you agree to pay the additional $0 Non-Core Return Charge if you do not return your old rack.